top of page
Phone Charge Cable Bracket
Tyler Dinn
Designed by :
This design allows people with partial forearm to plug and unplug phone charger cables.
3D Printing Instructions:
Leave the STL flat as shown in the images. We do not advise printing in PLA. We suggest printing it with ABS, PolyCarbonate, PETG or equivalent. The cable's tip is very small and slippery, glue might be needed but it'll be a permanent attachment to the charging cable. Support needed. Top/bottom thickness: minimum 5 Print speed: 50mm/s max infill: 50% minimum
FREE STL File Download
bottom of page